Start with what the Cleveland Robe record confirms
The Halston x Homebodii Cleveland Robe is made from satin fabric with an HH print, and the supplied record notes OEKO-TEX® and GRS certification. It is a wrap design, available in sizes XS to XXL, and the model shown wears a size small at 172cm in height. Those are the facts to build a care routine around.
The record does not include a fibre composition or a wash label, so the steps below are careful habits for printed satin rather than manufacturer instructions. Check the label on your robe when it arrives and let it override anything here.
The facts that shape your wash routine
- Halston x Homebodii Cleveland Robe - Eggshell Blue HH Print *Final Sale*: Satin fabric with an HH print, OEKO-TEX® certified and GRS certified. A printed surface is the part most likely to show wear, so treat the print as the priority when washing and drying.

Halston x Homebodii Cleveland Robe - Eggshell Blue HH Print *Final Sale* - Halston x Homebodii Cleveland Robe - Eggshell Blue HH Print *Final Sale*: Wrap design in sizes XS to XXL. A wrap robe has a belt and overlapping fronts; fastening the belt before washing helps keep the shape tidy.
- Halston x Homebodii Cleveland Robe - Eggshell Blue HH Print *Final Sale*: Designated Final Sale and not eligible for returns or exchanges. Because you cannot exchange it, confirm your size and read the care label before the first wash rather than after.
How to wash a printed satin robe with care
No wash temperature or cycle is supplied for this robe, so use the gentlest method you can and test anything new on a small area first.
- Check the label first: The supplied record has no care instructions, so the sewn-in label is your best guide. If it conflicts with these habits, follow the label.
- Fasten the belt and close the wrap: Tying the belt and smoothing the fronts stops the robe twisting around itself in the wash.
- Turn it inside out: This puts the HH print against itself rather than against other items, which is a simple robe print fading prevention habit.
- Wash separately or with like colours: Eggshell blue is a pale shade; keep it away from dark or new dyed items that could bleed.
- Choose a gentle, cool setting: Use a delicate or hand-wash cycle and a mild detergent. Avoid chlorine bleach and harsh stain removers, which are risky on printed satin.
Robe drying tips that protect the print
- Skip the tumble dryer: High heat is hard on satin and prints. Air-drying is the safer default when no drying instruction is supplied.
- Hang or lay flat in the shade: Direct sun can dull a pale blue print over time, so dry away from strong sunlight.
- Hang by the shoulders, not the belt: A wide hanger supports the wrap shape and stops the belt stretching out of shape.
- Smooth rather than wring: Gently press water out instead of twisting, then reshape the robe while damp.
Storing an eggshell blue robe between wears
Eggshell blue shows marks and creases easily, so give the robe room on a padded hanger rather than cramming it into a full wardrobe. Keep it away from damp and from anything that could transfer dye, and let it air after wearing before putting it away.
If you need to press it, use the coolest setting your iron allows and press on the reverse, away from the print. The supplied record does not give an iron temperature, so test on an inside seam first.
What the record does not tell you
The supplied information does not confirm fibre content, an exact wash temperature, drying method, iron setting or whether the robe is machine washable. Treat those as label questions, not assumptions. What it does confirm is the satin HH print, the wrap design, the XS to XXL size range and the Final Sale status.
Because the Cleveland Robe is Final Sale, size and care decisions carry more weight than usual. Read the label as soon as it arrives, wash it gently the first time, and you give the print the best chance of staying sharp.

